Diamond and borazon stones on shaft
Diamant :
for the rectification of:
tungsten
carbide - carbon - graphite - ferroceramic
- glass - reinforced plastic - quartz and steel - super-alloys
of more than 60 RC.
Borazon : for high carbon steel - chrome - H.S.S. - copper - refractory and stainless steel.
Stones on shaft
dimensions |
shaft |
Diamond |
Borazon |
||
D107 |
D064 |
B107 |
B064 |
||
Ø 1 x 2 |
Ø 3 |
N 03/011 |
N 04/011 |
||
2 x 4 |
3 |
N 03/021 |
N 04/021 |
||
3 x 5 |
3 |
N 03/030 |
N 03/031 |
N 04/030 |
N 04/031 |
5 x 6 |
6 |
N 03/050 |
N 03/051 |
N 04/050 |
N 04/051 |
6 x 6 |
6 |
N 03/060 |
N 03/061 |
N 04/060 |
N 04/061 |
8 x 8 |
6 |
N 03/080 |
N 03/081 |
N 04/080 |
N 04/081 |
10 x 8 |
6 |
N 03/100 |
N 03/101 |
N 04/100 |
N 04/101 |
12 x 8 |
6 |
N 03/120 |
N 03/121 |
N 04/120 |
N 04/121 |
Ø 2 |
Ø 3 |
N 03/321 |
|||
3 |
3 |
N 03/331 |
|
N 04/331 |
|
4 |
6 |
N 03/340 |
N 03/341 |
||
6 |
6 |
N 03/360 |
N 03/361 |
|
N 04/361 |
dimensions in mm |
D100 |
D070 |
|
|
Ø 16 x 10 x Ø 6 |
N 03/537 |
N 03/539 |
|
|
Ø 20 x 10 x Ø 6 |
N 03/547 |
N 03/549 |
|
|
Ø 25 x 10 x Ø 6 |
N 03/557 |
N 03/559 |
|
|
Ø 30 x 10 x Ø 10 |
N 03/567 |
N 03/569 |
|
|
Ø 40 x 10 x Ø 10 |
N 03/577 |
N 03/579 |
|
|
Diamond stones with a bore
Mounting : directly
on the axe of your machines of on machines for shaft mounted tools
with our mandrels L50/101
with a shaft of 6 mm for stones with a bore of 6 mm.
L50/103
with a shaft of 6 mm for stones with a bore of 10 mm.
Using speed : between 15 and 30 m/sec. following the possibilities of your equipment.
Lubrication : always preferable to increase the service life, the cutting capacity and the state of the surface.
Grits : D = Diamond B = Borazon
D or B 064 :
grits of
63 up to
53 microns
070 :
grits of
69 up to
58 microns
100 :
grits of
98 up to
88 microns
107 :
grits of
106 up to
90 microns uniformly divided and fixed by a layer of nickel.
