Tungsten carbide discs, strokes, files and sanding blocs

The tungsten carbide grits are fixed on a strip-steel backing. These highly abrasive surfaces have been developed for the work on polyester, resin, plaster, different kinds of stones, cement, concrete,wood, coatings, rubber,…

Strokes for orbital sanders

 

dimensions in mm

coarse

medium

fine

95 x 235

C 14/030

C 14/031

C 14/032

1

115 x 280

C 14/040

C 14/041

C 14/042

1

Discs for power drill

 

Ø 127 Max. RPM=3.500

C 14/060

C 14/061

C 14/062

1


Backing plate with a shaft of 6,35 mm

C 01/003

1

Holder for manual sanding

 

Holder with 1 garniture (coarse)

C 14/130

1

Garnitures for holder for manual sanding

 

70 x 125

C 14/140

C 14/141

-

1

Manual files

 

Ø 10 x 250/320 mm covered with grits of 1,2 up to 1,8 mm

C 14/013

1

10 x 250/320 mm covered with grits of 1,2 up to 1,8 mm

C 14/015

1

rectangular 25/5 x 200/310 mm, two-sided
1 side with grits of 0,8 up to 1,2 mm
1 side with grits of 0,3 up to 0,5 mm

C 14/020

1

Discs for angle grinder

dimensions in mm

Max. RPM

covered with grits of

1,2 up to 1,8 mm

0,8 up to 1,2mm

0,3 uo to 0,5 mm

Ø 115 x Ø 22

10.300

C 14/211

C 14/213

C 14/215

1

Home

To respect the maximum using speed, use the disc Ø 115 C14/21* on an angle grinder for discs of Ø 125 mm.