Hand grindstones

RECORD Stones

Also called surgery stone.
Color : white. Soft and of a very fine Aluminium oxide grit.
For delicate whetting of surgical instruments, scalpels,... and to ameliorate the obtained surface with K01 and K02 stones.

shapes

dimensions in mm

ORDER No

for gouges

115 x 45 x 6/2

K 03/268

1

rectangular

100 x 25 x 6

K 03/275

1

150 x 50 x 16

K 03/279

1

175 x 50 x 25

K 03/281

1

Arkanses natural stones

Natural Arkansas stone (USA), very hard and of an extra fine grit.
For all delicate whetting. To be used with water or an extra thin oil.
The dimensions of the stones are approximative.

shapes

dimensions in mm

ORDER No

for gouges

± 115 x 45 x 10/3

K 04/385

1

rectangular

± 100 x 13 x 6

K 04/360

1

± 101/125 x 35/50 x 15/20

K 04/361

1

± 126/150 x 40/50 x 20/25

K 04/362

1

files

square ± 8 x 100

K 04/350

1

triangle ± 8 x 100

K 04/352

1

Boron carbide stones

Oilstone in boron carbide, to retouch and to give a super finish to all cutting edges of tools with tungsten carbide covering. Unbreakable, very good cut, to use with a thin oil or with petrol.
Very much appreciated by fitters, turners and mechanics.
Increase the performance and reduce the frequency of sharpening operations.

 

shapes

dimensions in mm

grits

ORDER No

files with a handle

total length = 120

180

K 05/001

1

220

K 05/002

1

360

K 05/003

1

500

K 05/004

1

files

square 10 x 100

360

K 05/010

1

triangle 10 x 100

360

K 05/011

1

round 10 x 100

360

K 05/012

1

Ceramic aluminium oxide

This set is composed of 11 in a very fine grit small section stones.
square 50 x 1 and 50 x 2 mm                                        
triangle 50 x 2, 100 x 3 and 100 x 5 x 1,5 mm               
round 50 x 1, 100 x 2 and 100 x 3 mm
rectangular 50 x 3 x 0,3 mm
half-round 100 x 4 mm
ellipse 100 x 4 x 1,5 mm                        
+ 1 stone-holder
Fine grit, very high density, very sharp, does not crumble, not porous.

 

set of 11 ceramic stones
in aluminium oxide

ORDER No

K 08/011

1

 

Home

 Next

Previous

 Menu manual grinding