You are here > Glues and adhesives > Glue for pistols Hot-Melt
     Glues and adhesives : Glue for pistols Hot-Melt

  • Standard using temperature between 180°C and 200°C.
  • If the pistol enables to regulate the temperature, only a test will permit to select the optimal temperature.
  • The glues are non-inflammables, non-toxic and can be used without restriction.
  • To store at room temperature in a dry place.
  • The glued objects can be disassembled by heating the glue joint at 85-95 °C.
  • Assembling of different materials: apply the glue on the material which is not a conductor of heat.
  • Temperature range: from -20°C to +65°C.
  • Tensile resistance: 20 up to 40 kg/cm².
  • 20 to 30 m of joint per kg of glue (nozzle 1,6 mm)



Glue for pistols Hot-Melt

Article Nb. Dimensions (mm) Specifications Colour Open time Appllications Min. Qty
 X70/012 12 x 275 Transparant Transparant 45 sec. All less visibile gluing, Glass and plexiglass, ... 1
 X71/112 12 x 275 Standard Yellowish 30 sec. Wood and most of the hard plastics, pavings, cables. 1
 X72/212 12 x 275 Rapid Yellow 15 sec. Closing of packages 1

© 2008 Centre des Abrasifs Ltd.
General conditions | Privacy

The Company | Our Products | Our Sites | News | Contact | French | Deutsch | Nederlands