You are here > Honing Tools > Honing Brushes - Flex-Hone«
     
     Honing Tools : Honing Brushes - Flex-Hone«

Composed of a multitude of little abrasive spheres mounted on flexible wires to ameliorate the surface condition of:cylinders and boreshydraulic and pneumatic screwsglazing of cylindersbrake cylindersbarrels of firearmsblind boresAlso for slightly oval bores or slightly conical cylinders.Obtained roughness values:grit C 60      = 100 up to 125 micro-inches C.L.A. grit C 120    = 40 up to 50 micro-inches C.L.A. grit C 180    = 30 up to 40 micro-inches C.L.A. grit C 400    = 15 up to 25 micro-inches C.L.A. grit A0 800    = 8 up to 12 micro-inches C.L.A. grains C 800  = 8 Ó 12 micro-inches C.L.AThe treated material, the initial state of the surface, the rotation speed and the used lubrication can alter these values which are sheer indicative.Use: - Never hone dry. Use our honing oil W03, in drops on the honing tool, or under constant sprinkle if your machine is adapted with a lubrication circuit. - Recommended rotation speeds : ° 4,5 up to ° 25 mm : ▒ 1200 RPM. ° 26 up to ° 51 mm : ▒ 800 RPM. ° 52 up tp ° 83 mm : ▒ 600 RPM. ° 84 up to ° 152 mm : ▒ 350 RPM. ° 153 up to ° 254 mm : ▒ 200 RPM. Introduce the brush into the pieceDuring honing, give the brush a reciprocative movement. Wash the pieces abundantly after honing.For information:The exterior diameter of a honing brush L 10, measured źin free air╗, will always be superior to the be honed °. This is logical, because to assure a regular honing on the 360░ of the interior bore, the honing brush must be slightly superior to the to be worked on ě. Without deforming risks, a brush can remove up to 0,02 mm. Not more.

 

      
      
 


Honing Brushes - Grit C60

Article Nb. ě min. ě max. Length (mm) Grid Min. Qty
 L10/383 77 83 320 60 1
 L10/389 84 89 320 60 1
 L10/395 90 95 320 60 1
 L10/405 96 105 320 60 1
 L10/418 106 118 320 60 1
 L10/427 119 127 450 60 1
 L10/440 128 140 450 60 1
 L10/452 141 152 450 60 1
 L10/465 153 165 450 60 1
 L10/478 166 178 450 60 1
 L10/490 179 190 450 60 1
 L10/503 191 203 450 60 1
 L10/528 204 228 880 60 1
 L10/254 229 254 880 60 1


Honing Brushes - Grit C120

Article Nb. ě min. ě max. Length (mm) Grid Min. Qty
 L10/304 4.9 5.1 200 120 1
 L10/305 5.2 5.5 200 120 1
 L10/306 5.6 6.4 200 120 1
 L10/307 6.5 7 200 120 1
 L10/308 7.1 8.5 200 120 1
 L10/309 8.6 9 200 120 1
 L10/310 9.1 10.6 200 120 1
 L10/312 11.2 12 200 120 1
 L10/313 12.1 13.5 200 120 1
 L10/316 13.6 16 200 120 1
 L10/318 16.1 18 200 120 1
 L10/319 18.1 19.5 200 120 1
 L10/322 20.6 22.5 200 120 1
 L10/326 22.6 25.4 200 120 1
 L10/332 25.5 31.8 200 120 1
 L10/335 31.9 35.5 200 120 1
 L10/338 35.6 38.5 200 120 1
 L10/341 38.6 41.5 200 120 1
 L10/345 41.6 45.5 200 120 1
 L10/351 45.6 51.5 200 120 1
 L10/357 52 57.5 200 120 1
 L10/364 58 64.5 200 120 1
 L10/370 65 70.5 200 120 1
 L10/376 71 76 200 120 1
 L10/083 77 83 320 120 1
 L10/389 84 89 320 120 1
 L10/395 90 95 320 120 1
 L10/105 96 105 320 120 1
 L10/118 106 118 320 120 1
 L10/127 119 127 450 120 1
 L10/140 128 140 450 120 1
 L10/152 141 152 450 120 1
 L10/165 153 165 450 120 1
 L10/178 166 178 450 120 1
 L10/190 179 190 450 120 1
 L10/203 191 203 450 120 1
 L10/228 204 228 880 120 1


Honing Brushes - Grit C180

Article Nb. ě min. ě max. Length (mm) Grid Min. Qty
 L10/001 3.8 4.2 155 180 1
 L10/002 4.3 4.5 155 180 1
 L10/003 4.6 1.8 155 180 1
 L10/004 4.9 5.1 200 180 1
 L10/005 5.2 5.5 200 180 1
 L10/006 5.6 6.4 200 180 1
 L10/007 6.5 7 200 180 1
 L10/008 7.1 8.5 200 180 1
 L10/009 8.6 9 200 180 1
 L10/010 9.1 10.6 200 180 1
 L10/011 10.7 11.1 200 180 1
 L10/012 11.2 12 200 180 1
 L10/013 12.1 13.5 200 180 1
 L10/016 13.6 16 200 180 1
 L10/018 16.1 18 200 180 1
 L10/019 18.1 19.5 200 180 1
 L10/020 19.6 20.5 200 180 1
 L10/022 20.6 22.5 200 180 1
 L10/026 22.6 25.4 200 180 1
 L10/032 25.5 31.8 200 180 1
 L10/035 31.9 35.5 200 180 1
 L10/038 35.6 38.5 200 180 1
 L10/041 38.6 41.5 200 180 1
 L10/045 41.6 45.5 200 180 1
 L10/051 45.6 51.5 200 180 1
 L10/057 52 57.5 200 180 1
 L10/064 58 64.5 200 180 1
 L10/070 65 70.5 200 180 1
 L10/076 71 76 200 180 1



© 2008 Centre des Abrasifs Ltd.
General conditions | Privacy

The Company | Our Products | Our Sites | News | Contact | French | Deutsch | Nederlands